Quick oil drain valve

Ask Questions and Offer Advice Related to the Cessna 120 & 140 Type

Moderators: 6183, 6643, V529

Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
mnsky
Posts: 2
Joined: Mon Aug 26, 2019 9:46 pm
Location: East Grand Forks, MN
Name: Steve
Aircraft Type: 140
Occupation: Commercial vehicle sales and farmer.
Contact:

Quick oil drain valve

Post by mnsky » Wed Mar 25, 2020 5:20 pm

Hi, I have a 85 hp Continental in my 140 with a quick oil drain valve. You just push it up an it snaps open with a curved clip on both sides. Anyway it’s dripping oil slowly and I can’t find it online anywhere. Does anyone know if this type has a replaceable o-ring or do you have to replace it?
Thanks for any advice.

User avatar
6643
Posts: 1139
Joined: Tue May 01, 2018 7:00 am
Location: KLCI
Name: John C
Aircraft Type: 1946 C140/C90
Occupation: A&P, semi-retired
Contact:

Re: Quick oil drain valve

Post by 6643 » Wed Mar 25, 2020 7:11 pm

I believe it has an o-ring (99.44% certainty) but I don't know what size. Randy may know.

6277
Posts: 109
Joined: Tue May 01, 2018 7:00 am
Location: Ann Arbor, MI
Name: Ray Hunter
Aircraft Type: C-140
Occupation: Retired AF, B-17, UH-1, pilot for Yankee Air Museum
Contact:

Re: Quick oil drain valve

Post by 6277 » Thu Mar 26, 2020 6:55 am

Sounds like the QD valve in my C-85. Below is a picture from ebay to compare.

Auto-Valve BJ1000AH3D O-ring is PN RS 28775-109 Can't recall where I got the O-ring.

https://www.ebay.com/itm/Auto-Valve-qui ... 4601975365

6863
Posts: 63
Joined: Tue May 01, 2018 7:00 am
Location: EWK Newton, KS
Name: John Kliewer
Aircraft Type: C120
Occupation: Corporate PIlot - retired
Contact:

Re: Quick oil drain valve

Post by 6863 » Thu Mar 26, 2020 9:35 am

I have removed my quick drain and gone back to the original plug after seeing the sludge buildup at the bottom of the oil tank. I now rinse out my oil tank at least twice at every oil change and believe I get better draining action with the plug removed than with a quick drain in place but open. Probably just a mind game myth of mine but it makes me feel better regardless of the blood letting while re-safetying the plug.
John Kliewer

"Make things as simple as possible but no simpler." Albert Einstiein

"Wheels move the body. Wings move the soul."

8424
Posts: 65
Joined: Sun Mar 17, 2019 11:43 am
Location: OK74
Name: Steve A H
Aircraft Type: 1950 C140A
Occupation: Retired
Contact:

Re: Quick oil drain valve

Post by 8424 » Thu Mar 26, 2020 10:53 am

John,

"I now rinse out my oil tank at least twice at every oil change"

How are you rinsing your oil tank?

Steve A H

User avatar
6643
Posts: 1139
Joined: Tue May 01, 2018 7:00 am
Location: KLCI
Name: John C
Aircraft Type: 1946 C140/C90
Occupation: A&P, semi-retired
Contact:

Re: Quick oil drain valve

Post by 6643 » Thu Mar 26, 2020 11:43 am

6277 wrote:
Thu Mar 26, 2020 6:55 am
Sounds like the QD valve in my C-85. Below is a picture from ebay to compare.

Auto-Valve BJ1000AH3D O-ring is PN RS 28775-109 Can't recall where I got the O-ring.
That's the same valve I was thinking of. The O-ring PN listed above should be MS, not RS, and any well stocked maintenance facility should have one. You can get it from Aircraft Spruce, too, but the shipping will probably be 10x the cost of the part. In a pinch (non-approved information follows) the -109 is the (SAE) size and any good quality Buna-N o-ring should work.

mnsky
Posts: 2
Joined: Mon Aug 26, 2019 9:46 pm
Location: East Grand Forks, MN
Name: Steve
Aircraft Type: 140
Occupation: Commercial vehicle sales and farmer.
Contact:

Re: Quick oil drain valve

Post by mnsky » Thu Mar 26, 2020 12:48 pm

Thanks everyone, yes, that is the type of drain valve I have. I’ll track down a o-ring.
Great club!

6863
Posts: 63
Joined: Tue May 01, 2018 7:00 am
Location: EWK Newton, KS
Name: John Kliewer
Aircraft Type: C120
Occupation: Corporate PIlot - retired
Contact:

Re: Quick oil drain valve

Post by 6863 » Fri Mar 27, 2020 7:18 am

Steve, I rinse out my oil tank with solvent, letting it sit in the tank for a few minutes prior to draining it. Then I let it dry out before servicing with oil.
John Kliewer

"Make things as simple as possible but no simpler." Albert Einstiein

"Wheels move the body. Wings move the soul."

Post Reply Previous topicNext topic

Who is online

Users browsing this forum: No registered users and 1 guest