Identifying early/late model gear legs

Ask Questions and Offer Advice Related to the Cessna 120 & 140 Type

Moderators: 6643, 6183, V529

Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
8024
Posts: 31
Joined: Tue May 01, 2018 7:00 am
Location: Eau Claire, WI
Name: Todd
Aircraft Type: C-140
Occupation-Interests: Aircraft Parts & Salvage, Owner Assisted Aircraft Sales, Flight Club Management.
Contact:

Identifying early/late model gear legs

Post by 8024 »

Good day all--

My understanding is that there are 3 different variants of main gear legs for the C-140. Early, middle and late model production. I have several gear legs in my stock but they have been removed and I am not sure if there is an easy way to identify which "series" they are. If anyone has a good way to tell them apart by visual means, I would be indebted.

Many thanks!

Todd Littfin
Smokin' Rivet Airparts & Salvage
User avatar
6597
Posts: 331
Joined: Tue May 01, 2018 7:00 am
Location: Vancouver WA KVUO
Name: David Sbur
Aircraft Type: '46 140 0-200A
Occupation-Interests: Agriculture
Contact:

Re: Identifying early/late model gear legs

Post by 6597 »

viewtopic.php?f=10&t=121

Start with this article by Neal Wright.

Someone else can jump in, but I think there were 3 iterations of the gear legs, the first 2 being interchangeable left and right, and the last having a 'bend' to mimic the extenders and thus a 'left' and 'right'. How you would determine the 'bend' (or 'twist' in Neal's article) I don't know. Here's a pic of my bird with another bird, showing the gear legs in profile on the plane. The first shows the 'straight' legs, the second shows the 'forward bend' legs. Use the wing struts to see the difference. Hopefully someone has some more useful information for you.

I'm certain the first iteration had the 1/4" axle bolt holes.

sweep.JPG
sweep.JPG (110.76 KiB) Viewed 9149 times
Attachments
140A partsbook.jpg
140A partsbook.jpg (264.01 KiB) Viewed 9149 times
120-140 parts book.jpg
120-140 parts book.jpg (269.75 KiB) Viewed 9149 times
8474
Posts: 313
Joined: Sat May 25, 2019 12:08 pm
Location: Saskatchewan
Name: Blaine F
Aircraft Type: C140A
Occupation-Interests: Helicopter Pilot
Contact:

Re: Identifying early/late model gear legs

Post by 8474 »

I see you referenced the 140A parts book. Does that mean that only after the A model was introduced that the "bent" legs were introduced and were then retrofitted on earlier 140's?
8424
Posts: 214
Joined: Sun Mar 17, 2019 11:43 am
Location: OK74
Name: Steve A H
Aircraft Type: 1950 C140A
Occupation-Interests: Retired
Contact:

Re: Identifying early/late model gear legs

Post by 8424 »

Hi Todd!

According to the parts lists David shows, the specific left gear ('bent gear'), part #0441149, started with C120/C140 serial #14307.

The following Cessna document indicates serial #14307 was toward the end of the 1947 serial number group.

https://support.cessna.com/custsupt/con ... s_id=23391

My 1949 C140, serial 14913, had the 'bent' gear.

Hope this helps.

Steve H
User avatar
6643
Posts: 2326
Joined: Tue May 01, 2018 7:00 am
Location: KLCI
Name: John C
Aircraft Type: 1946 C140/C90
Occupation-Interests: A&P, semi-retired
Contact:

Re: Identifying early/late model gear legs

Post by 6643 »

PN 0441110 Straight, symmetrical about the center line, fits left or right, 1/4" axle bolt holes. Up to sn 13399
PN 0441138 Straight, symmetrical about the center line, fits left or right, 5/16" axle bolt holes. Sn 13400-14306
PN 0441149 Angled, not symmetrical, 5/16" axle bolt holes, fits left, sn 14307 -> and all 140a
PN 0441149-1 Angled, not symmetrical, 5/16" axle bolt holes, fits right, sn 14307 -> and all 140a
8024
Posts: 31
Joined: Tue May 01, 2018 7:00 am
Location: Eau Claire, WI
Name: Todd
Aircraft Type: C-140
Occupation-Interests: Aircraft Parts & Salvage, Owner Assisted Aircraft Sales, Flight Club Management.
Contact:

Re: Identifying early/late model gear legs

Post by 8024 »

Thank you all for the replies and help.

John-by not symmetrical you mean that the gear leg "taper" is not the same reduction in "width" going down towards the bottom of the gear leg?

Just want to make sure I am understanding you correctly.

I do now remember about the 1/4 and 5/16 bolts as well--so that will help a lot. I'm almost certain they are the oldest style as I seem to have a fair about of 46 stuff but lesser of the 47/48 items.

I will check them out when I get a few moments as I am organizing the hangar.

Many thanks all!

TL
User avatar
6643
Posts: 2326
Joined: Tue May 01, 2018 7:00 am
Location: KLCI
Name: John C
Aircraft Type: 1946 C140/C90
Occupation-Interests: A&P, semi-retired
Contact:

Re: Identifying early/late model gear legs

Post by 6643 »

8024 wrote: Fri Jan 10, 2020 9:18 amJohn-by not symmetrical you mean that the gear leg "taper" is not the same reduction in "width" going down towards the bottom of the gear leg?
No. If you draw a line from the center top of the leg (where it fits into the gear box) down along the face of the leg to the center bottom, where the axle attaches, and you keep the line mid way between the edges of the leg (a "center line"), the straight gear will be symmetrical about this line and the swept gear will not be.
.
.
Not to scale...
Not to scale...
gear legs.jpg (189.45 KiB) Viewed 9104 times
User avatar
VIP620
Posts: 40
Joined: Tue May 01, 2018 7:00 am
Location: 69nd
Name: ken tengesdal
Aircraft Type: 120
Occupation-Interests: fly the 120 over sunflower fields and shoot blackbirds at the same time from august thru october or until the crop is harvested
Contact:

Re: Identifying early/late model gear legs

Post by VIP620 »

would you have any straight legs with 5/15 holes and what kind of price you asking for them (PN 0441138 Straight)
User avatar
8233
Posts: 276
Joined: Wed May 02, 2018 6:52 pm
Location: Kansas City
Name: David Freeland
Aircraft Type: 1946 C120
Occupation-Interests: Program Management
Contact:

Re: Identifying early/late model gear legs

Post by 8233 »

Can you put newer legs on one that has older ones now? I have a 46 but always wondered if the news legs were allowed.
David Freeland - CFII
1972 Bellanca Super Viking and 1946 Cessna 120
8373
Posts: 6
Joined: Sat Dec 22, 2018 11:06 pm
Location: South TX and Central CA
Name: Patrick W
Aircraft Type: C-140
Occupation-Interests: A&P, IA
Contact:

Re: Identifying early/late model gear legs

Post by 8373 »

8233 wrote: Sat Jan 11, 2020 2:35 pm Can you put newer legs on one that has older ones now? I have a 46 but always wondered if the news legs were allowed.
I would be concerned about the legality of installing an incorrect part number making the aircraft out of conformity with the type certificate. But I’m a big chicken.
Did you ever find out? I never saw any other responses from the experts on this board.
Patrick W
cessna180patrick@gmail.com
310 four three zero 3021
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests