My tailwheel seems to be the 2000, correct?6643 wrote: ↑Wed Aug 06, 2025 7:51 amYeah, but, with the 3200 the springs are only tensioned when you're steering and the wheel is resisting turning. When you're turning the rudder cables tend to offset the effect of the spring tension. With the 2000/3-24B they're always tensioned.
Mine are not stainless! They're rusty...Some of us prefer the non-twisting installation of the stainless steel tabs.
Bell crank tailwheel chain attachment tab replacement?
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
-
atypicalguy
- Posts: 109
- Joined: Fri May 07, 2021 7:13 pm
- Name: Karl
- Location: Los Angeles
- Aircraft Type: 140
- Occupation-Interests:
- Contact:
Re: Bell crank tailwheel chain attachment tab replacement?
-
6643
- Posts: 2609
- Joined: Tue May 01, 2018 7:00 am
- Name: John C
- Location: KLCI, NH
- Aircraft Type: 1946 C140/C90
- Occupation-Interests: A&P, semi-retired
- Contact:
Re: Bell crank tailwheel chain attachment tab replacement?
Well, it's not a 3200! (I can never remember which is which between the 2000 and 3-24B)
John Cooper
www.skyportservices.net
www.skyportservices.net