Rebuilding the TW assembly on my C140. I am struggling to find P/N 0442116 (Retainer - Tailwheel Rubber Attachment). Does anyone know where I could find this part?
Thanks,
Jacob
Trying to find P/N 0442116
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
-
- Posts: 12
- Joined: Fri Oct 25, 2024 3:55 am
- Name:
- Location: Savannah, GA
- Aircraft Type: Cessna 140
- Occupation-Interests:
- Contact:
- 6597
- Posts: 440
- Joined: Tue May 01, 2018 7:00 am
- Name: David Sbur
- Location: Vancouver WA KVUO
- Aircraft Type: '46 140 0-200A
- Occupation-Interests: Agriculture
- Contact:
Re: Trying to find P/N 0442116
Make your own out of bulk rubber sheet from the hardware store, I don't recall whether it's 3/16" or 1/4" thick.
-
- Posts: 12
- Joined: Fri Oct 25, 2024 3:55 am
- Name:
- Location: Savannah, GA
- Aircraft Type: Cessna 140
- Occupation-Interests:
- Contact:
Re: Trying to find P/N 0442116
Where could I find the dimensions for this? I'm also confused what the difference is between P/N 0442116 and 0442119. Have also been unable to find P/N 0442119.
- 6597
- Posts: 440
- Joined: Tue May 01, 2018 7:00 am
- Name: David Sbur
- Location: Vancouver WA KVUO
- Aircraft Type: '46 140 0-200A
- Occupation-Interests: Agriculture
- Contact:
Re: Trying to find P/N 0442116
My bad, needed magnifying glass to see the parts book....
0442116 (Retainer - Tailwheel Rubber Attachment) see CESSNA 120/140/140A TAILWHEEL
Spring Set Details, Mysteries and Secrets by Neal Wright, page 13 for parts dimensions to make your own if you don't have it already. Not sure where you'll find it otherwise. It's a metal piece.
P/N 0442119 are just pieces of sheet rubber, I think the bottom one I made from 1/4" thick and the top one 3/16" thick (to help with the tailwheel angle).
0442116 (Retainer - Tailwheel Rubber Attachment) see CESSNA 120/140/140A TAILWHEEL
Spring Set Details, Mysteries and Secrets by Neal Wright, page 13 for parts dimensions to make your own if you don't have it already. Not sure where you'll find it otherwise. It's a metal piece.
P/N 0442119 are just pieces of sheet rubber, I think the bottom one I made from 1/4" thick and the top one 3/16" thick (to help with the tailwheel angle).
-
- Posts: 76
- Joined: Sat Jan 04, 2020 3:23 pm
- Name: Tom Reneau
- Location: KMAF
- Aircraft Type: 1949 C140A
- Occupation-Interests: Corporate Pilot
- Contact:
Re: Trying to find P/N 0442116
You can go to any gasket store and they will have sheet rubber to make this out of. Do you have the old ones to use as a template?
- 6643
- Posts: 2609
- Joined: Tue May 01, 2018 7:00 am
- Name: John C
- Location: KLCI, NH
- Aircraft Type: 1946 C140/C90
- Occupation-Interests: A&P, semi-retired
- Contact:
Re: Trying to find P/N 0442116
They're just squares with a hole for the bolt. Make them out of a piece of tire sidewall. (Don't remember where I read that...)
John Cooper
www.skyportservices.net
www.skyportservices.net