For Sale, misc small stuff
Posted: Mon Aug 10, 2026 3:24 pm
Cleaning out old stuff, make offers and pay shipping and they’re yours, or pick up FOB Portland OR/Vancouver WA. I can send pics if you PM me with an email address…
1. Antenna, about 18” long, BNC connector, used for old LORAN system
2. Original GE solenoid for 140’s, works, but I’m not an originality person so I got the $30 Cessna equivilent back in the day.
3. Vacuum system stuff-suction gauge, filters, regulator
4. Vacuum Directional Gyro, worked right up till my vacuum pump gave up the ghost so I can’t say how good it still is, I overhauled it once when I first got my bird. Old AN style.
5. Vacuum Artificial Horizon. Worked fine, old AN style
6. Lower cowl lip, new, part# 0452199. Discovered it doesn’t fit my early ‘46 lower cowl
7. Sharc 7 ELT 121.5 with tray, includes antenna. I replaced with a 406 unit. Checked fine every annual for 32 years, I just did some math on battery replacement and the new 406 unit broke even (the Sharc batteries went up quite a bit).
8. Original ¼” hole pattern axles. I replaced mine with Groves when you could still get the ¼” hole pattern. You can inspect, comes with the nuts.
9. Original back engine baffle, use for pattern, free, pay shipping.
1. Antenna, about 18” long, BNC connector, used for old LORAN system
2. Original GE solenoid for 140’s, works, but I’m not an originality person so I got the $30 Cessna equivilent back in the day.
3. Vacuum system stuff-suction gauge, filters, regulator
4. Vacuum Directional Gyro, worked right up till my vacuum pump gave up the ghost so I can’t say how good it still is, I overhauled it once when I first got my bird. Old AN style.
5. Vacuum Artificial Horizon. Worked fine, old AN style
6. Lower cowl lip, new, part# 0452199. Discovered it doesn’t fit my early ‘46 lower cowl
7. Sharc 7 ELT 121.5 with tray, includes antenna. I replaced with a 406 unit. Checked fine every annual for 32 years, I just did some math on battery replacement and the new 406 unit broke even (the Sharc batteries went up quite a bit).
8. Original ¼” hole pattern axles. I replaced mine with Groves when you could still get the ¼” hole pattern. You can inspect, comes with the nuts.
9. Original back engine baffle, use for pattern, free, pay shipping.