140 floor parts

For Buyers & Sellers: A Place to List Aircraft and Related Parts For Sale or Wanted to Buy

Moderators: 6643, 6183, V529

Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
Post Reply
8269
Posts: 4
Joined: Thu Jun 28, 2018 1:06 am
Name: Tom S
Aircraft Type:
Occupation-Interests:
Contact:

140 floor parts

Post by 8269 »

I'm not sure of the proper name. But, I need the parts to extend the floor around the rudder pedals. Both pilot and co pilot sides. If anyone has these for sale or knows where I can source them please let me know. Thanks
4004
Posts: 221
Joined: Tue May 01, 2018 7:00 am
Location: KFGU TN
Name: Edd
Aircraft Type: 140
Occupation-Interests: Retired
Contact:

Re: 140 floor parts

Post by 4004 »

Did you find the floor parts? If not, check the " 1946 140 Part Out" of Steve AH #8424 above and click on one of the Ebay links that he listed regarding seat parts. It will take you to the guys Ebay store where he has the floor parts, both sides for $99 plus nominal shipping. FWIW
8269
Posts: 4
Joined: Thu Jun 28, 2018 1:06 am
Name: Tom S
Aircraft Type:
Occupation-Interests:
Contact:

Re: 140 floor parts

Post by 8269 »

Sorry for the slow reply. Yes, I did find the parts in Minnesota. Thanks.
User avatar
8233
Posts: 276
Joined: Wed May 02, 2018 6:52 pm
Location: Kansas City
Name: David Freeland
Aircraft Type: 1946 C120
Occupation-Interests: Program Management
Contact:

Re: 140 floor parts

Post by 8233 »

I'm looking for the exact same pieces if anyone has any leads.
David Freeland - CFII
1972 Bellanca Super Viking and 1946 Cessna 120
8281
Posts: 55
Joined: Sat Jul 28, 2018 3:54 pm
Name: John L
Aircraft Type:
Occupation-Interests:
Contact:

Re: 140 floor parts

Post by 8281 »

P.M Sent !

John
8224
Posts: 95
Joined: Tue May 01, 2018 7:00 am
Name:
Aircraft Type:
Occupation-Interests:
Contact:

Re: 140 floor parts

Post by 8224 »

David, I plan on driving to the convention, it is about a 4 hour drive for me. I am restoring a ‘47 140 and plan on fabricating the two “floor boards” you are looking for. If you want, I will make two sets and bring one with me to the convention for you. They are very light and simple to fabricate. I will my old set for patterns. I will trade them for advice and pictures!
Steve Hawley
User avatar
8233
Posts: 276
Joined: Wed May 02, 2018 6:52 pm
Location: Kansas City
Name: David Freeland
Aircraft Type: 1946 C120
Occupation-Interests: Program Management
Contact:

Re: 140 floor parts

Post by 8233 »

8224 wrote: Mon Jul 26, 2021 6:52 am David, I plan on driving to the convention, it is about a 4 hour drive for me. I am restoring a ‘47 140 and plan on fabricating the two “floor boards” you are looking for. If you want, I will make two sets and bring one with me to the convention for you. They are very light and simple to fabricate. I will my old set for patterns. I will trade them for advice and pictures!
Steve Hawley
Thanks Steve for the offer! I was able to locate a set but I will keep you in mind if I end up needing them if the ones I am getting turn out to not be so good. I am unlikely to make the convention this year due to a new job but I am always happy to share whatever advice I can although I tend to be more on the asking side than the giving compared to a lot of the seasoned veterans on here.

Thanks again!
David Freeland - CFII
1972 Bellanca Super Viking and 1946 Cessna 120
User avatar
8233
Posts: 276
Joined: Wed May 02, 2018 6:52 pm
Location: Kansas City
Name: David Freeland
Aircraft Type: 1946 C120
Occupation-Interests: Program Management
Contact:

Re: 140 floor parts

Post by 8233 »

8224 wrote: Mon Jul 26, 2021 6:52 am David, I plan on driving to the convention, it is about a 4 hour drive for me. I am restoring a ‘47 140 and plan on fabricating the two “floor boards” you are looking for. If you want, I will make two sets and bring one with me to the convention for you. They are very light and simple to fabricate. I will my old set for patterns. I will trade them for advice and pictures!
Steve Hawley
Steve, turns out the set I got ahold of are going to need modifications to fit. Do you have a pattern you were going to use? I wouldn't mind taking a look at it if possible and might be interested in taking you up on your offer to fabricate a set depending on how workable the set I have is.

Thanks again!
David Freeland - CFII
1972 Bellanca Super Viking and 1946 Cessna 120
8224
Posts: 95
Joined: Tue May 01, 2018 7:00 am
Name:
Aircraft Type:
Occupation-Interests:
Contact:

Re: 140 floor parts

Post by 8224 »

David, I have the old ones out on my work bench and it will be very easy to make a new set using the old ones as a pattern. I haven’t measures the thickness of the aluminum but I suspect it is .020”. I have .016 and .025 so I will make them out of the .025. My phone is (520) 237 3373. Give me a call, we can exchange e-mail address and I can send you a picture or two.
Steve
Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests