Looking for the aileron bushings for the project 120 I am working on. It was purchased as a disassembled basket case and 2 of those were missing.
Curious to know if any type of bushing the same size would work or if they are hardened. Again it's for the aileron brackets to pivot on once they are re-installed.
Thanks in advance!
WTB Aileron bushings
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
-
bill y
- Posts: 21
- Joined: Tue Aug 06, 2019 11:24 am
- Location: Massillon, Ohio 44646
- Name: Bill Yates
- Aircraft Type: Cessna 120
- Occupation-Interests: Mortgage Banker
- Contact:
-
6643
- Posts: 2337
- Joined: Tue May 01, 2018 7:00 am
- Location: KLCI
- Name: John C
- Aircraft Type: 1946 C140/C90
- Occupation-Interests: A&P, semi-retired
- Contact:
Re: WTB Aileron bushings
Are you taking about the sleeve that fits inside the needle bearing for the aileron hinge? If so, I haven't found an off the shelf replacement. The problem is they're about .050 longer than the industrial part.
They form the inner race of the needle bearing and are hardened and plated. PN 0422215. MacFarlane has a PMA replacement for $38.41 each.
They form the inner race of the needle bearing and are hardened and plated. PN 0422215. MacFarlane has a PMA replacement for $38.41 each.
John Cooper
www.skyportservices.net
www.skyportservices.net
-
bill y
- Posts: 21
- Joined: Tue Aug 06, 2019 11:24 am
- Location: Massillon, Ohio 44646
- Name: Bill Yates
- Aircraft Type: Cessna 120
- Occupation-Interests: Mortgage Banker
- Contact:
Re: WTB Aileron bushings
Yes that is exactly what I am referring to. I am on Mcfarlane site and they show a rudder bushing. I wonder if its the same part number. I'll search my 120 parts manual....
-
6643
- Posts: 2337
- Joined: Tue May 01, 2018 7:00 am
- Location: KLCI
- Name: John C
- Aircraft Type: 1946 C140/C90
- Occupation-Interests: A&P, semi-retired
- Contact:
Re: WTB Aileron bushings
The same part is used in each aileron and elevator. It is not the same as the rudder, which uses bushings, not bearings. Just enter the part number (0422215) into their search box.
John Cooper
www.skyportservices.net
www.skyportservices.net
Who is online
Users browsing this forum: No registered users and 11 guests