Compass mounting location

Ask Questions and Offer Advice Related to the Cessna 120 & 140 Type

Moderators: 6643, 6183, V529

Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
8451
Posts: 83
Joined: Wed Apr 24, 2019 1:20 am
Name: Daniel
Aircraft Type: Formerly a 120
Occupation-Interests:
Contact:

Compass mounting location

Post by 8451 »

I’m curious where people have ended up mounting their compasses over the years. My airplane has an air path compass mounted in the panel and while it swings freely that’s about all it does. I’d like something a bit more functional, is there a recommended way to degauss the panel and leave it there or would elsewhere be more appropriate?
8474
Posts: 313
Joined: Sat May 25, 2019 12:08 pm
Location: Saskatchewan
Name: Blaine F
Aircraft Type: C140A
Occupation-Interests: Helicopter Pilot
Contact:

Re: Compass mounting location

Post by 8474 »

Compass? You mean you actually look at the compass :lol:
User avatar
6643
Posts: 2326
Joined: Tue May 01, 2018 7:00 am
Location: KLCI
Name: John C
Aircraft Type: 1946 C140/C90
Occupation-Interests: A&P, semi-retired
Contact:

Re: Compass mounting location

Post by 6643 »

Mine is on the top of the glare shield in a right-angle bracket. At some point in the past someone changed my panel to one from an early 150.
V529
Posts: 552
Joined: Tue May 01, 2018 7:00 am
Location: Michigan
Name: Victor G
Aircraft Type: C-120
Occupation-Interests: Work on airplanes till the cows come home..........they're still out.
Contact:

Re: Compass mounting location

Post by V529 »

6643 wrote: Thu Oct 24, 2019 6:13 am Mine is on the top of the glare shield in a right-angle bracket. At some point in the past someone changed my panel to one from an early 150.
'

Ditto: I have a Precision Vertical Card compass and it's on top of the glareshield.

That being said, if you have an original Airpath, they were all installed inside the panel and worked quite well. I'm not sure why yours spins. I would be looking at what electrical equipment is mounted nearby or behind the unit.
4004
Posts: 221
Joined: Tue May 01, 2018 7:00 am
Location: KFGU TN
Name: Edd
Aircraft Type: 140
Occupation-Interests: Retired
Contact:

Re: Compass mounting location

Post by 4004 »

Don't laugh but I've seen it happen!

Does it have fluid in it? No fluid to dampen the card and they can spin easily!!!
8451
Posts: 83
Joined: Wed Apr 24, 2019 1:20 am
Name: Daniel
Aircraft Type: Formerly a 120
Occupation-Interests:
Contact:

Re: Compass mounting location

Post by 8451 »

Thanks for the suggestions so far. My compass does have full fluid in it, it just isn’t accurate at all (certainly well beyond the 10 deg tolerance a “good” compass should have).

What would be the best way to go through the panel and see what part is causing the most interference?
User avatar
6643
Posts: 2326
Joined: Tue May 01, 2018 7:00 am
Location: KLCI
Name: John C
Aircraft Type: 1946 C140/C90
Occupation-Interests: A&P, semi-retired
Contact:

Re: Compass mounting location

Post by 6643 »

Did anyone try to swing the compass? If the errors are constant, that might be all you need. If the errors vary then look for something electrical or something that moves.
User avatar
hotrodmac
Posts: 63
Joined: Mon Aug 12, 2019 12:33 am
Location: Mint Hill, NC
Name: Lance B
Aircraft Type: C140
Occupation-Interests: Information Technology
Contact:

Re: Compass mounting location

Post by hotrodmac »

8451 wrote: Mon Oct 28, 2019 9:41 am Thanks for the suggestions so far. My compass does have full fluid in it, it just isn’t accurate at all (certainly well beyond the 10 deg tolerance a “good” compass should have).

What would be the best way to go through the panel and see what part is causing the most interference?
Out of curiosity, how far off is your compass? Mine's usually around 30 degrees off until I turn on the alternator, then it's 40 degrees off. I have the Plane Power Alternator, BTW. I'm going to try to swing mine this weekend, see if I can get it closer. Not sure how close I'm gonna get though with that much deviation.
'46 C140 - Flying
Kitfox SS7 - Building
8451
Posts: 83
Joined: Wed Apr 24, 2019 1:20 am
Name: Daniel
Aircraft Type: Formerly a 120
Occupation-Interests:
Contact:

Re: Compass mounting location

Post by 8451 »

hotrodmac wrote: Fri Nov 01, 2019 7:02 pm
8451 wrote: Mon Oct 28, 2019 9:41 am Thanks for the suggestions so far. My compass does have full fluid in it, it just isn’t accurate at all (certainly well beyond the 10 deg tolerance a “good” compass should have).

What would be the best way to go through the panel and see what part is causing the most interference?
Out of curiosity, how far off is your compass? Mine's usually around 30 degrees off until I turn on the alternator, then it's 40 degrees off. I have the Plane Power Alternator, BTW. I'm going to try to swing mine this weekend, see if I can get it closer. Not sure how close I'm gonna get though with that much deviation.
30-40 degrees sounds about right, although I haven’t really checked beyond glancing and knowing it was far enough off to not bother trying.
User avatar
6643
Posts: 2326
Joined: Tue May 01, 2018 7:00 am
Location: KLCI
Name: John C
Aircraft Type: 1946 C140/C90
Occupation-Interests: A&P, semi-retired
Contact:

Re: Compass mounting location

Post by 6643 »

Of course, you have a compass deviation card that reflects all these errors, because, otherwise, the aircraft would not be airworthy...
Post Reply

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 10 guests