Engine cooling

Ask Questions and Offer Advice Related to the Cessna 120 & 140 Type

Moderators: 6643, 6183, V529

Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
Post Reply
8451
Posts: 83
Joined: Wed Apr 24, 2019 1:20 am
Name: Daniel
Aircraft Type: Formerly a 120
Occupation-Interests:
Contact:

Engine cooling

Post by 8451 »

I recently purchased a 120 and it is equipped with CHT for the two rear cylinders. While flying it I noticed one of them has the tendency to top 400 dF during climb, even if I try climbing at 85-90 MPH. Oil temperature remains in line during this time and CHT is fine in level flight. OAT was 32-33 dC on the ground.

The airplane had at one point spent several years of its life in Wisconsin before coming south, is there a chance there is some sort of winterization kit applied that may be heating things up? I noticed the manual notes a “summerization kit,” which as I understand it is a lip on the trailing edge of the bottom cowling which helps cooling - I noticed this lip tends to be present on other model airplanes of the same era.

Are there any suggestions as to how I may check to ensure my temperatures are controlled? I can look at the baffling but the issues only present themselves during climb; my initial impression is I may not gain much there.
User avatar
6643
Posts: 2326
Joined: Tue May 01, 2018 7:00 am
Location: KLCI
Name: John C
Aircraft Type: 1946 C140/C90
Occupation-Interests: A&P, semi-retired
Contact:

Re: Engine cooling

Post by 6643 »

C-85? The limit is 540 degrees. If the reading makes you uncomfortable, cover the gauge with something. ;)

(The summerization kit also includes inter-cylinder baffles.)
8451
Posts: 83
Joined: Wed Apr 24, 2019 1:20 am
Name: Daniel
Aircraft Type: Formerly a 120
Occupation-Interests:
Contact:

Re: Engine cooling

Post by 8451 »

6643 wrote: Mon May 20, 2019 9:06 am C-85? The limit is 540 degrees. If the reading makes you uncomfortable, cover the gauge with something. ;)

(The summerization kit also includes inter-cylinder baffles.)
Yes, C-85. I know the strength of aluminum drops off quickly above 400 dF, prompting my concern, certified redline notwithstanding.
8359
Posts: 229
Joined: Tue Nov 27, 2018 10:53 pm
Location: KSNA
Name: Tamer A
Aircraft Type: 1946 C120 O-290-D
Occupation-Interests: Engineer
Contact:

Re: Engine cooling

Post by 8359 »

I've been thinking about this as well, I hit 400*F pretty easy in my O-290, however my oil temp never peaks 170-180*F. I know Mike Busch recommends no more than 400*F, but he is a self proclaimed longevity nut.

My concern is that my oil temp doesn't seem to be getting high enough. Lycoming recommends at least 185*F (up to 210*F) for oil operating temp in order to help burn off any moisture that gets into the oil. I've never been able to get it up that high. And I'm not sure I want to with my CHTs near 400*F.

Seems like an impossible task to me, maybe if I ditched the oil cooler.
Image
4004
Posts: 221
Joined: Tue May 01, 2018 7:00 am
Location: KFGU TN
Name: Edd
Aircraft Type: 140
Occupation-Interests: Retired
Contact:

Re: Engine cooling

Post by 4004 »

Have you calibrated your oil temp system?
8342
Posts: 293
Joined: Sun Oct 14, 2018 11:55 pm
Location: KUSE Wauseon OH
Name: Rick F
Aircraft Type: C-140 (sold)
Occupation-Interests: Captain B-777 (Retired)
Contact:

Re: Engine cooling

Post by 8342 »

8451 wrote: Mon May 20, 2019 8:16 am I recently purchased a 120 and it is equipped with CHT for the two rear cylinders. While flying it I noticed one of them has the tendency to top 400 dF during climb, even if I try climbing at 85-90 MPH. Oil temperature remains in line during this time and CHT is fine in level flight. OAT was 32-33 dC on the ground.

The airplane had at one point spent several years of its life in Wisconsin before coming south, is there a chance there is some sort of winterization kit applied that may be heating things up? I noticed the manual notes a “summerization kit,” which as I understand it is a lip on the trailing edge of the bottom cowling which helps cooling - I noticed this lip tends to be present on other model airplanes of the same era.

Are there any suggestions as to how I may check to ensure my temperatures are controlled? I can look at the baffling but the issues only present themselves during climb; my initial impression is I may not gain much there.
What temperature is the other probe indicating?

It may be just an indication issue.

I would swap the probes around to see if it follows.

Rick
8359
Posts: 229
Joined: Tue Nov 27, 2018 10:53 pm
Location: KSNA
Name: Tamer A
Aircraft Type: 1946 C120 O-290-D
Occupation-Interests: Engineer
Contact:

Re: Engine cooling

Post by 8359 »

4004 wrote: Mon May 20, 2019 8:06 pm Have you calibrated your oil temp system?
I have not, but it's on my list of things to do.
Image
8451
Posts: 83
Joined: Wed Apr 24, 2019 1:20 am
Name: Daniel
Aircraft Type: Formerly a 120
Occupation-Interests:
Contact:

Re: Engine cooling

Post by 8451 »

8342 wrote: Mon May 20, 2019 8:11 pm
8451 wrote: Mon May 20, 2019 8:16 am I recently purchased a 120 and it is equipped with CHT for the two rear cylinders. While flying it I noticed one of them has the tendency to top 400 dF during climb, even if I try climbing at 85-90 MPH. Oil temperature remains in line during this time and CHT is fine in level flight. OAT was 32-33 dC on the ground.

The airplane had at one point spent several years of its life in Wisconsin before coming south, is there a chance there is some sort of winterization kit applied that may be heating things up? I noticed the manual notes a “summerization kit,” which as I understand it is a lip on the trailing edge of the bottom cowling which helps cooling - I noticed this lip tends to be present on other model airplanes of the same era.

Are there any suggestions as to how I may check to ensure my temperatures are controlled? I can look at the baffling but the issues only present themselves during climb; my initial impression is I may not gain much there.
What temperature is the other probe indicating?

It may be just an indication issue.

I would swap the probes around to see if it follows.

Rick
Rick, one probe is indicating about 410-420, the other is about 360.
User avatar
5115
Posts: 97
Joined: Tue May 01, 2018 7:00 am
Location: Montreal, Quebec, Canada
Name: Martin Tanguay
Aircraft Type: C140
Occupation-Interests:
Contact:

Re: Engine cooling

Post by 5115 »

Put both probes in boiling water and see if they both get to 212F.
There could be some good differences between the front cylinder temp and the rear ones.
Lots of things can affect cylinder temp. Baffling, cable or harness in the airflow, preventing proper back cylinders cooling, etc.
You need to know if both probes are good to start with.
Martin Tanguay
Intl Cessna 120-140 Association - Canadian rep
C140, C-FJAR, 1946, sn:9168, O-200, ragwings
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 14 guests