Hi everybody,
in my millenium cylinders (C 90F converted to O 200) I saw only two valve springs one inner and one outer. But in the maintenance manual it should be three of them?
Are the two springs in the millenium cyls stronger or what?
Looking for clarifying!
Thanks
Bengt
How many valve springs in c 90 o 200?
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
-
8171
- Posts: 4
- Joined: Tue May 01, 2018 7:00 am
- Name:
- Aircraft Type:
- Occupation-Interests:
- Contact:
-
V529
- Posts: 552
- Joined: Tue May 01, 2018 7:00 am
- Location: Michigan
- Name: Victor G
- Aircraft Type: C-120
- Occupation-Interests: Work on airplanes till the cows come home..........they're still out.
- Contact:
Re: How many valve springs in c 90 o 200?
Great question, I wish I could answer with 100% conviction.
I also have Millenium cylinders. Since it's a PMA'd part, the misc parts, (rocker arms, shafts, springs, seats etc) should all be identical.
I don't have pictures of my valve springs layed out(only coiled up) but I suspect there should be three springs.
The IPC shows p/n 24031 as the inner valve spring.
How long have the cylinders been on in this condition?
I also have Millenium cylinders. Since it's a PMA'd part, the misc parts, (rocker arms, shafts, springs, seats etc) should all be identical.
I don't have pictures of my valve springs layed out(only coiled up) but I suspect there should be three springs.
The IPC shows p/n 24031 as the inner valve spring.
How long have the cylinders been on in this condition?
Who is online
Users browsing this forum: No registered users and 13 guests