Page 1 of 1
Cracked exhaust flange
Posted: Thu Oct 29, 2026 7:33 am
by ray r
The flange on the right rear (#1) cylinder on my C85-12F with the Cessna 150 exhaust has developed a significant crack.
1) is there a best place to have it welded.
2) does anyone have a good replacement muffler assay.
Thanks
Ray
Re: Cracked exhaust flange
Posted: Thu Oct 29, 2026 7:47 am
by 7392
DAWLEY AVIATION
140 INDUSTRIAL DR
BURLINGTON, WI 53105
1-262-661-9999
ASK FOR KIRK
I used this company for cracked straight pipes two different times. The repair came back like
NEW....including the shroud. I highly recommend them.
Larry Surratt
C140 89011
26R
JACKSON COUNTY TEXAS
Re: Cracked exhaust flange
Posted: Thu Oct 29, 2026 8:03 am
by 6643
I, too would recommend Dawley, except they were acquired by Aerospace Welding a few years back. I'm not sure if the old contact info works; I think operations have been transferred to the AWI location.
In the "I can't keep up" department, it looks like AWI has been acquired by Hartzell...
the Cessna 150 exhaust has developed a significant crack...
There are no insignificant cracks!
Re: Cracked exhaust flange
Posted: Tue Nov 10, 2026 11:28 am
by 8164
Ray, I don't know if you were able to weld your riser, but Hartzell (formerly AWI Welding) has them in stock for $150.00.
https://hartzellaviation.com/products/a ... ight-riser