Brake sensitivity

A Place to Share Experiences and Discuss Aviation Stories

Moderators: 6643, 6183, V529

Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
Post Reply
8187
Posts: 15
Joined: Tue May 01, 2018 7:00 am
Name:
Aircraft Type:
Occupation-Interests:
Contact:

Brake sensitivity

Post by 8187 »

My 140 the pedals move maybe an 1/2 inch and the brakes are really working. I flew another 140 a few weeks ago and the pedals moved maybe 2 inches before working and were much less sensitive. What’s everyone else’s planes like?
2066
Posts: 600
Joined: Tue May 01, 2018 7:00 am
Location: North Carolina
Name: Mac Forbes
Aircraft Type: '46 Cessna 140
Occupation-Interests: Retired - Current 120-140 Assoc. NC Rep.
Contact:

Re: Brake sensitivity

Post by 2066 »

It'll probably vary according to wear in linkage and maybe even condition of fluid(?). That said, with my old Goodyear brakes, the travel was more than with the Clevelands (which are approx.. 1/2", like yours). Also, the Clevelands are much smoother and provide more stopping power than is really needed...a good reminder to be easy on applying & to keep the tailwheel glued down on landing roll-out :shock: . The Goodyears worked well when I could find and keep new/serviceable pucks which became more of a challenge over the years, hence the "conversion". Mac
User avatar
6643
Posts: 2337
Joined: Tue May 01, 2018 7:00 am
Location: KLCI
Name: John C
Aircraft Type: 1946 C140/C90
Occupation-Interests: A&P, semi-retired
Contact:

Re: Brake sensitivity

Post by 6643 »

8187 wrote: Sun Apr 12, 2020 2:12 pm My 140 the pedals move maybe an 1/2 inch and the brakes are really working.
Are the brakes retracting properly? If they drag, there will be very little travel before they apply.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests