Page 1 of 1

Aileron Balance tool

Posted: Fri Mar 29, 2019 8:59 pm
by V529
Our ailerons are balanced from the factory. There are heavy weights bolted to the outboard forward edge of the aileron. For the "V" strut C-120 and C-140's they weigh about 3.5 lbs. (quite a bit!, but then the weights are very close to the hinge line)

The 140A have weights about 1/2 that weight.

NOTE: The elevators are not balanced.

From the old website I've located this tool drawing for performing aileron balance checks. It's not terribly scientific once you've done a few.