Originally Posted on Mon Aug 01, 2005 5:37 pm
Many of the Narco ELT-10 units were installed incorrectly, with an insulator misplaced. Without the insulator, the range of the ELT signal is drastically reduced, though it cannot be discerned if only a short range test is done.
This article shows the fault and what should be and how to make it correct if the isulator is missing.
Don't assume yours is correct just because you made tests by using a handheld or the ship's radio to listen.
Neal
Narco ELT-10 Disabled and the Cure
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
-
101
- Posts: 49
- Joined: Mon Jun 04, 2018 12:38 am
- Name: Neal Wright
- Aircraft Type:
- Occupation-Interests:
- Contact:
Narco ELT-10 Disabled and the Cure
- Attachments
-
- narco_elt-10_correction.pdf
- Check your Narco ELT for a too-common fault.
- (48.46 KiB) Downloaded 462 times
Who is online
Users browsing this forum: No registered users and 3 guests